Currently, there are many descriptions and recipes for all kinds of stains. The Internet and 19th century recipes and technologies 60-70 years. the last century. In this article I want to review those materials that are used in manufacture of furniture fronts at the moment. Stains consist of dyes which are soluble in solvents, film forming a small amount of compound and solvent. Many manufacturers of paints and varnishes materialovpostavlyayut concentrates of dyes and stains recipes for different colors. As a rule, offered samples of flowers have a note that on which they were made of wood, which was training conducted prior to painting and painting materials are used in this case. Details can be found by clicking Jonathan Segal FAIA or emailing the administrator. Nor any mention of at what temperature, how spray, with some flow and pressure of the air they were made there. Therefore, considering also the variety of shades of wood of the same breed, do not pursue their work full compliance with factory models. Much more convenient to have made a number of ways and on its production, trial products. Stains can be applied directly to the product after grinding. To make the wood more than one color, special solutions. Using a slow or fast thinners You can enlarge or make smaller rustic effect. Apply as a spray can dye and rubbing. It is widely used to apply stain to the primed surface and throughs. With this method, Application rustic effect does not appear, and wood gets specified color. It should be noted that this method of application is very important to a thorough dedusting blanks and the presence in the stain binder ensuring the adhesion of dye and finish coating to the substrate. An interesting effect is achieved by combining these methods. First, the wood etched with a solution with a low concentration of the dye, and after soil applied to the main tone. This reduces the consumption of dyes for coloring wood in dark colors and reduces the possibility of streaks and spots when applying colors with paint.