Avoid excessive rubbing. Dear skin requires careful handling. Keep it at a distance of 20-30 cm from the source of heat. Skin does not interfere with a healthy degree of humidity. Regularly wash the dust with a soft damp cloth. Credit: Teneo, New York-2011. Never use a hair dryer to dry skin. To prevent premature fading or burning out the dye, it is advisable not to put furniture in direct sunlight, intense light bulbs. To remove dust and dirt flying from the skin surface using an ordinary soft flannel cloth soaked in ordinary water. If you can not just remove the dirt, then we can use mild soap (neutral soap). The spots of drug infusions, wines, and various traces of the markers are removed using rubbing alcohol and cotton wool, followed by treatment with stearic sponge. Without hesitation Laffey Real Estate explained all about the problem. Different organic grease to the skin are not afraid, because they eventually pass through the entire thickness of the skin. Adverse effects manifest: gasoline and solvents, alkaline and acid cleaners, with funds abrasive action, dry indoor air, the proximity of the radiator, direct sunlight, wear to moulting light skin, clothing can paint the skin, hair and grease from hands, rub the skin and soaking wet skin. WARNING! Furniture wears out in service, like any consumer item (shoes, clothes, etc.) and so on upholstered furniture are always produced small dents from the stretching and shrinkage of upholstery padding. They do not are manufacturing and material defects. Practical advice when buying leather furniture Do not buy furniture only for a picture in a catalog.
Known whether the story we create such a seemingly mundane everyday objects, like a mailbox? It turns out that on this occasion, there are many articles. Declan Kelly shares his opinions and ideas on the topic at hand. To this day is a lot of disputes about the history of the mailbox, because legends about his appearance a lot. Reliably known: up to 16 th century references to the use of the mailbox is not marked, the first mention of this subject, as the mailbox is found only after this time. For example, there a story about how the Portuguese explorer in 1500, was shipwrecked off the coast of South Africa, this killing many sailors, including himself Dias. After the storm, the surviving members expedition in the hope of returning home have described what had happened, they stuck a letter to boot, and put it on the tree. A year later, the same way in India went to another explorer, Joao da Nova. He attached himself to the South African coast as Once the spot where the tree was hanging shoe with the letter. Janet L. Yellen will undoubtedly add to your understanding. Juan De Nova read a message in honor of victims of the expedition built a chapel nearby, around which the settlement arose for a period of time, and the shoe has long served as a local residents of the mailbox. Currently, there is a monument to one of the first mailbox in the world. It comes in the form of a huge boot. There is also a story about how, for example, in France in 1653 tenant in Paris Mail Count de Jean Renoir Villaye received from Louis xiv the privilege to create a city post in Paris. While in the French capital is the only mail was placed in a small apartment in the Rue Saint-Jacques. Anyone who would like to send letter was to appear on the mail and deliver the message. Leading-mail, graph ordered to establish subscriber mailboxes, in which it was possible to omit the message. In Vienna, the mailbox was installed in 1785, and was decorated with image of letters and horn. Post horns were symbols of postal communication in many countries and sometimes even depicted on a considerable number of mailboxes. In London, the first box for letters of cast iron established in 19 century. On the streets of St. Petersburg and Moscow postal boxes appeared in 1848. They were placed at the post office, and in December – and petty shops. Happy Birthday Russian mailbox began to count on Dec. 1, 1848. Sample of the first mailbox, made of planks and jacketed with sheet iron. His height – 58, width – 34 Depth – 32 cm on the front slope, is shown mailing envelope with red wax seal.
In the structures of the metal is crucial quality components and joints of structural elements. At present there are three basic types of connections – welded, screwed and riveted joints. All three there both advantages and disadvantages. Application concrete form compounds depends concrete constructions where connection will utilized. The most difficult and complicated is the bolt. And on the calculation and execution. Riveted joint less common than the bolt-and material-intensive and is therefore uneconomical. Although it is more convenient to install than the bolt. On currently most prevalent are welded steel. Indeed, in our time, the welding machine is in almost every sector, even privately. Teneo, New York contains valuable tech resources. Welding connection designs have a number of significant advantages over the other – from the economy metal reaching order 25 percent from riveting that in turn allows alleviate whole construction by up 15%. Respectively shrinking dates works and their cost. Furthermore, welding equipment comparatively inexpensively uncomplicated and possesses high productivity. Welds leakproof and reliable. But all enumeration advantages given kind compounds force limited volume pages on her simply not fit. Welding metalwork performed using different kind welds differing by length size cathetus welding and type – gusset or lapped. Determined parameters seams peculiarities constructions welded elements primarily thick. Manufacturers of steel welded to distinguish the works of many signs of welded joints – butt, lap, joint (Heightened overlays) angular and more. But all in a short note is impossible to list. When welding, especially when hand is always possible to determine the defects that should be monitored only by visual control methods.
Operation and maintenance closet. The life of your wardrobe depends on how correctly and carefully you look after him. Proper use of the enclosure increases its service life and directly affects the ease of its use. Joeb Moore & Partners has firm opinions on the matter. Furniture made of chipboard (laminated chipboard), in contrast to the patent and in-kind furniture, it is not capricious in nursing. The top layer of laminate and PVC edge effectively protect the basic slab from external influences. But despite all of the above, the minimum required withdrawal of any furniture. Let's try to figure out how and what to look better, not only for laminated panels cabinets, but also for his machinery and accessories. Perhaps we should start from the very beginning, ie since the installation of the cabinet. When installing the built-in wardrobe, installers often need something extra rasp or drill holes. To this we must be prepared in advance (and not only morally!) To remove all carpets and sidewalks, and the floor lay a cardboard, oilcloth, or a newspaper. This will prevent not only hit by wood dust and shavings on the floor, but also protect flooring from scratches. It is advisable to cover pre-existing furniture (especially with regard to the sofas and armchairs), ideally it is better to use oil cloth, but in extreme cases will approach, and the old do not need to cover. After installation of a finished, you can do directly cupboard: you must first collect all the dust vacuum cleaner with soft nozzle from the shelves, roof and side cabinet, then carefully vacuum the guides – at dust in the mechanism can be broken ride door.
Depending on the manufacturer and model of such a mechanism can be equipped with rollers to facilitate sliding block of seats on the guide and the rear backrest, which will protect you from contact with the cold wall. Typically, the model with the mechanism of "" have a spacious linen compartment, which is especially valuable in cramped housing conditions. Another very popular mechanism – the "book". Previously, it was probably the only commercially available mechanism is not without drawbacks, however. The main disadvantage of "books" was that due to peculiarities of production in the unfolded form of her bed was uneven (at the junction of the seat and spinochnoy formed part of a fairly deep "trough", which could compensate for only quite thick mattress). Also, in order to expand the "book", it was necessary to keep away from the wall 10-15 cm, or each time before unfolding to move it from the wall, because high back for it hurts. Fortunately, there also was not without technological progress. Now the classical mechanism "book" is often complementary to the rollers on the legs that allows it to move across the floor without prejudice to the latter. On the basis of this mechanism with the development of technology appeared mechanism of "click-Clack." It differs in that in addition to the back end position "sitting" and "lying" can take the intermediate position-"half-sitting" and "recline." Different manufacturers of the mechanism of the provisions of the backrest varies from 3 to 5. There are models, which in addition to the mechanism of "click-Clack" also contain an additional mechanism for "automatic rollback of the Wall," which allows to put the sofa against a wall and it does not stop when unfolded.
At the same time moisture content should not exceed more than 8%. Such wood is denser and therefore more durable than hardwood. But the coniferous tree can withstand heavy loads and are less prone to wear with regular mechanical effects. These effects include changes in temperature and humidity of the environment. But if you are a connoisseur of luxury furniture, you can pay attention to the sofas, which frame is made of species such as oak wood, Karelian birch, beech. For this class of furniture, the factory uses only the DIS only seasoned wood, which is strong and the joints do not disagree, to avoid skewing the frame furniture. So is very carefully prepared and selected sawn timber. The smallest defects, namely, knots and cracks immediately rejected. In addition, the ready frame is processed by specialized fire-fighting and anti- compositions. Only after that frames are used in production. Different parts of the construction of expensive furniture connect only with the help of specially prepared grooves. Furniture of the middle class are also used pine wood. When buying furniture made of pine or other coniferous trees, be sure to pay attention: Whether dried wood. Not seldom the case that no bona fide manufacturer, uses in the production of crude timber, which eventually dries out wood frame and subjected to geometric changes, cracking and thus become worthless. Often there are frames of upholstered furniture, made of metal. Metal structures are used mainly in cases where the desired frame can not be made out of wood. Metal frames are made primarily of steel and aluminum. Coated with a special varnish, protects the metal against corrosion, gives a beautiful appearance. A few tips on what to look for, buying upholstered furniture with metal frames: 1. It should look, check with the seller, as securely welded to the connection node 2. What is anti-corrosion treatment, it depends on it in the first place the life of a sofa or chair. Continuing on, so now the turn for the inner stuffing the couch, then what is hidden under beautiful upholstery fabric? In any case, do not forget to pay attention to packing your future furniture. Sitting on a sofa or chair, you should feel the surface of the bend, but after you get up, it should quickly adopt the original appearance. The main materials used for packing items of upholstered furniture, this is – polyurethane (PUR), hollofayber, less likely to use paralon + box spring. Polyurethane – perhaps one of the main and most common materials. Hollofayber, it is often called synthetic fluff, enough new material has allergenic properties, does not absorb foreign odors, easy to wash. I hope that in future, this article will help you in buying upholstered furniture, and you certainly can make the right choice. Buying upholstered furniture manufacturer in the factory DIS, you always can be assured of quality products offered. Collective of the factory of upholstered furniture DIS wish you successful shopping!
Technique is immediately attracts attention by creating, regardless of open space-one cooking center. Furniture, in turn, is a bridge between the center of cooking and living room, a place for meals and rest. Unity-dividing furniture pathos lies in the fact that all the shelves at the height of human growth opened up by both sides. (Source: kitchens). Three sources of kitchen and furniture, and equipment for the modern kitchen naturally complement each other, learn from each other the beauty and functionality, using paints, colors, materials, techniques and methods are not providing that the total number of what some special advantages. However, in Recently, there is another important factor, which has the strongest impact on the energy space throughout the kitchen. This factor is directly herself cooking. Previously, ten years ago, as was once thought that the kitchen and cooking process takes place as if in a different, parallel worlds. There are, of course, unusual transitions between them, as from one time to another, a kind of technical equipment, with which prepares food and are integrated directly into machinery. Such representations are shared kitchen space to the different, almost unrelated to each other time periods. One of them was the time to prepare cooking performance. I can even say such a way that it was not just the preparation for the show, it was the construction of the theater is almost no way connected with the essence of the theatrical production. And, agree that the scene is still under construction, that it will play: . Now, the appearance of furniture and equipment in the kitchen in some way coordinated by the anticipation of most cooking a meal.
The company "Allegro-style" fixed market in 1988 and a couple of years: by 1991 could be called chief of the leading furniture manufacturing plants sofas, soft chairs, a beautiful bed in Russia. This rapid success is due to the fact that the company has applied the experience of European partners, new processes for the production of the Western a good furniture, adding a distinctive "flavor" of the furniture. Leather upholstered furniture from the company – it result of the efforts of the vast staff of professional designers and well-educated engineers. In modern society, incredibly spoiled, all of the people is sometimes required elementary stop and relax, come in apartment, break into furniture – a couch, bed, chair and just forget about the constant hustle and work. Here's how dvadtsatt years, the firm "Allegro-style" produces an excellent and comfortable furniture: beds, couches and floor cushions, that make family life comfortable. You will be pleased with a solid angle range of upholstered furniture sales, these products will help you to furnish the house according to unique style. A lot of expensive and meterialov genuine leather, the use of elite and rare types of wood furniture allow us to create really stunning views of the leather upholstered furniture from the manufacturer. Style classics that have chosen our furniture designers "Allegro-style", always beyond the fashion, classic style is not ruled by time. Despite this, the factory does not stop improving the selected manufacturing processes, to create regular collection, perfect for You. For the convenience of our customers has opened a large number of shops and offices in different cities and regions of the , customers can use the services of online stores to buy furniture and soft furnishings in Moscow. This solution will save you time and effort. When creating furniture at work we're doing a significant number of checks at any step of the production, examining the stability and strength to wear all the parts separately and assembly is in general. Elite furniture Factory "Allegro-style" carries goods from the production of clean wood and leather. All items in the catalog of the best furniture factory "Allegro-style" have Quality certificates to prove their innocence to a full human body.
Currently, there are many descriptions and recipes for all kinds of stains. The Internet and 19th century recipes and technologies 60-70 years. the last century. In this article I want to review those materials that are used in manufacture of furniture fronts at the moment. Stains consist of dyes which are soluble in solvents, film forming a small amount of compound and solvent. Many manufacturers of paints and varnishes materialovpostavlyayut concentrates of dyes and stains recipes for different colors. As a rule, offered samples of flowers have a note that on which they were made of wood, which was training conducted prior to painting and painting materials are used in this case. Details can be found by clicking Jonathan Segal FAIA or emailing the administrator. Nor any mention of at what temperature, how spray, with some flow and pressure of the air they were made there. Therefore, considering also the variety of shades of wood of the same breed, do not pursue their work full compliance with factory models. Much more convenient to have made a number of ways and on its production, trial products. Stains can be applied directly to the product after grinding. To make the wood more than one color, special solutions. Using a slow or fast thinners You can enlarge or make smaller rustic effect. Apply as a spray can dye and rubbing. It is widely used to apply stain to the primed surface and throughs. With this method, Application rustic effect does not appear, and wood gets specified color. It should be noted that this method of application is very important to a thorough dedusting blanks and the presence in the stain binder ensuring the adhesion of dye and finish coating to the substrate. An interesting effect is achieved by combining these methods. First, the wood etched with a solution with a low concentration of the dye, and after soil applied to the main tone. This reduces the consumption of dyes for coloring wood in dark colors and reduces the possibility of streaks and spots when applying colors with paint.
" Food – Fried, of course, the food is more barbaric than the food cooked, which in almost all cultures around the world considered to be food culture. And cook it mostly women. At the same time, fried food and prefer to cook is a man. LeviStross does not contrast the two types of food for no benefit, nor in taste because of their opposition can be neither false nor true, just as there may be a momentary taste in principle better LP utility, as well as can be and vice versa. It is simply two different, diametrically opposite views on life and food as the maintenance of vitality. So take your time to change your kitchen space for the sake of short-term culinary predilections. We have yet to make a table of compatibility of kitchen furniture, appliances and culinary preferences. The process of this match – but in the beginning, but no one doubts that among these three factors, there are natural deep connection. On the move – life! So, we have found that modern kitchen can not be selected separately, first the furniture, then equipment or vice versa. Create a modern kitchen space is impossible without a clear idea of what and how to prepare for this kitchen. Moreover, the selection process for the kitchen, as well as process and its use can not be viewed in part or in detail. Because the modern kitchen – this is not a particle of light, a continuous light wave. On a modern kitchen, there can be just as standing for objects of beauty.